Filter
Top Products
Assembly
7
• Insert a M4 x 31.5 mm bolt
through smaller hole in the
motorized frame tube and into
the seat tube.
•Attach an M4 lock nut to the bolt.Make sure the rounded
side of the lock nut faces out.
•Using an adjustable wrench, hold the lock nut in place.
Then, using a Phillips Screwdriver, tighten the bolt. Do not
over-tighten.
M4 x 31.5 mm Bolt
Shown Actual Size
M4 Lock Nut
Rounded
Side
•Fit the string (below the knot) of a toy
through the slot in a clip on the mobile.
•Pull down on the toy to be sure it is secure on the mobile.
•Repeat this procedure to assemble the other three toys to
the mobile.
Note: Toys may be different than those shown.
Clip
Slot
Clip
Mobile
Toy
Toy
14
13