Filter
Top Products
Swing and Mobile Use
10
Adjust Seat to Recline or Upright
You can adjust the seat to two different positions:
Recline or Upright.
•From behind the seat, press both seat position buttons.
• Lift the seat back until the buttons “snap” into the
upright position.
•Push the seat back down until the buttons “snap” into
the recline position.
Front Edge
of Seat
Press Seat Position Buttons
5
Adjust Swing Motion
You can adjust the motion of the swing: side to side or
front to back.
•Press the seat tube button to unlock the seat tube.
•Rotate the seat tube to the desired position.
Seat Tube Button
Seat Tube
4
Cradle
PRESS
TURN
Swing
Upright
Recline
•Press the buttons on the back of the motorized frame while
pushing the legs inward.
•Lean the swing frame against a wall for storage.
IMPORTANT! Remove the batteries for long-term storage.
Button
Button
Lower Leg
Button
Lower Leg
Button
Storage
Hint: The legs may be disassembled for long-term storage.
Press the button on each lower leg and remove them from the
upper legs.
7
•Fit the tabs on the tray into the slots in the sides of the seat.
•To remove the tray, pull the tab out on one side of tray
and lift.
Tab
Tray
Slot
Using the Tray
6