Filter
Top Products
10
Long Tab
Back
Panel
Roof
Back
Panel
Long Tab
Back
Panel
Assembly
• Firmly push down on the roof to insert the long tab on the
ladder panel into the slot in the roof.
• Firmly push down on the roof to snap the tabs on the back
panel into the slot in the roof.
• Push and pull the back panel, as shown to secure the
back panel in the roof.
• Check to be sure the roof is securely attached to the
panel assembly. Push up on the roof on all four sides.
If the roof can be removed from one of the panels,
re-read and repeat steps - .
• Fit the phone into the receiver on the wall panel.
• Firmly push down on the roof to insert the long tab on the
wall panel into the slot in the roof.
• Firmly push down on the roof to snap the back panel into
the slot in the roof.
Push Here
Push Here
Phone
Receiver