Filter
Top Products
• Loosen the screw on the
light bulb holder with a
Phillips screwdriver. (The
screw will remain in the
light bulb holder.)
• Pull the light bulb holder
straight up to remove.
• Pull to remove the light bulb
from the light bulb holder.
• Discard the light bulb
properly. Beware of
cracked or broken glass.
• Insert a new KPR113
Krypton bulb.
• Replace the light bulb
holder in the light bulb
compartment. Tighten the
screw with a Phillips screw-
driver. Do not over-tighten.
Light Bulb (Glass Bulb) Replacement
IMPORTANT! Should the light bulb become non-functional, you are
advised to remove or replace it. This should be carried out away from
the child’s play area.
Light Bulb
Compartment
Door
• Using a Phillips screw-
driver, turn the keyhole
clockwise.
Note: Make sure the tab
aligns with the notch.
• Loosen the screw on the
light bulb compartment
door with a Phillips
screwdriver. (The screw
will remain in the door.)
• Lift the light bulb com-
partment door to open.
1
1
2
2
Reel Storage
Compartment
Screw
Light Bulb
Holder
Light Bulb
Screw
Light Bulb
Compartment
Notch
Keyhole
Tab
Light Bulb
Holder
Light Bulb
9