Filter
Top Products
13
CHANGING BATTERIES
To change the batteries, slide the side covers on the battery
housing located underneath the arm rest in the direction of the
arrows. Remove the battery holders one at a time. Replace all 6
AA cells, making sure that each one is inserted with polarity
(+ or -) in the same direction as the ones you remove.
The M-96 power supply is located under the arm
rest at the top end of the stem.
Grasp either side of the M-96 battery compartment
by the top and bottom edges.
Slide the cover about half way off toward the
opposite end of the detector.
Grasp the nylon pull tape and dislodge the battery
pack by pulling up. Replace all six AA batteries.
Return the battery pack to the compartment,
making sure it snaps into place. Also, be careful to
keep the nylon pull tape within reach.
Hold the end of the battery pack down, along with
the nylon tape, and slide the cover back i into
position. Repeat steps 1-6 on the other side of the
battery compartment.