Ferris Industries IS1000ZKAV23/52 Lawn Mower User Manual


 
00
Safety Rules & Information
CHILDREN
Tragic accidents can occur if the operator is not alert to
the presence of children. Children are often attracted to
the unit and the mowing activity. Never assume that chil-
dren will remain where you last saw them.
Keep children out of the mowing area and under the
watchful care of another responsible adult.
Be alert and turn unit off if children enter the area.
Before and during reverse operation, look behind and
down for small children.
Never carry children. They may fall off and be seri-
ously injured or interfere with safe unit operation.
Never allow children to operate the unit.
Use extra care when approaching blind corners,
shrubs, trees, or other objects that may obscure
vision.
EMISSIONS
Engine exhaust from this product contains chemicals
known, in certain quantities, to cause cancer, birth
defects, or other reproductive harm.
Look for the relevant Emissions Durability Period and
Air Index information on the engine emissions label.
MAINTENANCE AND STORAGE
Always observe safe refueling and fuel handling
practices when refueling the unit after transportation
or storage.
Always follow the engine manual instructions for stor-
age preparations before storing the unit for both
short and long term periods.
Always follow the engine manual instructions for
proper start-up procedures when returning the unit to
service.
Never store the machine or fuel container inside
where there is an open flame, such as in a water
heater. Allow unit to cool before storing.
Shut off fuel while storing or transporting. Do not
store fuel near flames or drain indoors.
Keep all hardware, especially blade attachment bolts,
tight and keep all parts in good working condition.
Replace all worn or damaged decals.
Never tamper with safety devices. Check their prop-
er operation regularly.
Disengage drives, lower implement, set parking
brake, stop engine and remove key or disconnect
spark plug wire. Wait for all movement to stop before
adjusting, cleaning or repairing.
Clean grass and debris from cutting units, drives,
mufflers, and engine to prevent fires. Clean up oil or
fuel spillage.
Let engine cool before storing and do not store near
flame.
Stop and inspect the equipment if you strike an
object. Repair, if necessary, before restarting.
Never make adjustments or repairs with the engine
running unless specified otherwise.
Park machine on level ground. Never allow untrained
personnel to service machine.
Use jack stands to support components when
required.
Carefully release pressure from components with
stored energy. (eg. springs)
Disconnect battery or remove spark plug wire before
making any repairs. Disconnect the negative termi-
nal first and the positive last. Reconnect positive first
and negative last.
Use care when checking blades. Wrap the blade(s)
or wear gloves, and use caution when servicing
them. Only replace blades. Never straighten or weld
them.
Keep hands and feet away from moving parts.
Charge batteries in an open well ventilated area,
away from spark and flames. Unplug charger before
connecting or disconnecting from battery. Wear pro-
tective clothes and use insulated tools.
Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
decals.
Grass catcher components are subject to wear, dam-
age, and deterioration, which could expose moving
parts or allow objects to be thrown. Frequently
check components and replace with manufacturer’s
recommended parts, when necessary.
Check brake operation frequently. Adjust and service
as required.
Use only factory authorized replacement parts when
making repairs.
Always comply with factory specifications on all set-
tings and adjustments.
Only authorized service locations should be utilized
for major service and repair requirements.
Never attempt to make major repairs on this unit
unless you have been properly trained. Improper
service procedures can result in hazardous opera-
tion, equipment damage and voiding of manufactur-
er’s warranty.
5
TP 600-7124-00-UV-FD