Extron electronic VTG 400D Portable Generator User Manual


  Open as PDF
of 4
 
RS-232
50-60Hz
COMPOSITE
R G B H/HV V
S-VIDEO R-Y Y B-Y RGB
TRIGGER
AUDIO
1 2 3
SDI/HDSDI
100-240V 0.3A
LISTED
1T23
I.T.E.
Power Amplier
Audio
Video
Plasma Display
Extron
VTG 400D
Video & Audio
Test Generator
Extron 15-pin HD
VGA Cable
AUDIO
SIGNAL
TYPE
LEVEL
POWER
FREQUENCY
VIDEO
TEST
PATTERN
RANGE
SELECT
RATE
MENU
QUICK
SELECT
SCOPE -TRIGGER
1
2
3
CURSOR
SHAPE HIDE
4
NEXT
VTG 400
VIDEO & AUDIO TEST GENERATOR
www.extron.com
© 2008 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
USA West
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
China
+86.21.3760.1568 / +400.883.1568
+86.21.3760.1566 FAX
Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Europe
+31.33.453.4040 / +800.3987.6673
+31.33.453.4050 FAX
Dubai
+971.4.2991800
+971.4.2991880 FAX
Asia
+65.6383.4400 / +800.7339.8766
+65.6383.4664 FAX
www.extron.com
© 2008 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
USA West
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
China
+86.21.3760.1568 / +400.883.1568
+86.21.3760.1566 FAX
Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Europe
+31.33.453.4040 / +800.3987.6673
+31.33.453.4050 FAX
Dubai
+971.4.2991800
+971.4.2991880 FAX
Asia
+65.6383.4400 / +800.7339.8766
+65.6383.4664 FAX
Continued
sPecIFIcaTIons
VIdeo sIGnaL characTerIsTIcs
Dot clock .......................... 200 MHz (max.)
Pixel clock accuracy ............ 100 ppm
Horizontal frequency range
(factory defaults) .................. 15 kHz to 131 kHz
Vertical frequency range
(factory defaults) .................. 30 Hz to 120 Hz
Rise / Fall time
NTSC, PAL ......................... 140 ns
All other signal rates .............. <4 ns
VIdeo ouTPuT
Number / Signal type ........... 1 RGBHV, RGBS, RGsB, RsGsBs, component video, HDSDI (SMPTE 292M,
optional), SDI digital component video (SMPTE 259M-C), S-video, composite
video (NTSC/PAL)
Connectors ....................... 1 x 5 female BNC (RGB)
1 female 15-pin HD (RGB)
1 x 3 female BNC (component video)
1 female 4-pin mini DIN (S-video)
1 female BNC (composite video)
1 female BNC (SDI/HDSDI)
Nominal level .................... 1 Vp-p for Y of component video and S-video, and for composite video, RsGsBs
0.7 V Vp-p for RGB and for R-Y and B-Y of component video
0.286 Vp-p (burst) for C of NTSC S-video,
0.300 Vp-p (burst) for C of PAL S-video
Minimum / Maximum levels ... 0.0 V to 1.0 Vp-p
Impedance ........................ 75 ohms
Resolutions ....................... Computer (VGA–QXGA), video (NTSC, PAL), HDTV, 16:9 high resolutions, and
custom resolutions (user-defined)
Return loss ....................... -30 dB @ 5 MHz
DC offset .......................... 0 ±5 mV for RGB and component video,
0 ±5 mV for NTSC S-video and composite video
14 mV ±5 mV for PAL S-video and composite video
sync
Output type ....................... RGBHV, RGBS, RGsB, RsGsBs (for RGB signals)
Tri-level on Y, R-Y, B-Y channels (component video 720p, 1080i, 1080p)
Bi-level on Y channel (for all other component video rates)
Standards ......................... NTSC, PAL, SMPTE 170M, SMPTE 274M, SMPTE 293M, SMPTE 295M,
SMPTE 296M
Output level ...................... 0.3 Vp-p for RGsB, RsGsBs, component video (bi-level sync)
0.6 Vp-p for RsGsBs, component video (tri-level sync)
TTL: 5.0 Vp-p, unterminated for RGBHV, RGBS
Output impedance .............. 75 ohms
Max. Rise / Fall time ............ 5 ns (TTL sync)
Polarity ............................ Positive or negative (scan rate/signal dependent)
Scope trigger connectors ...... 1 BNC female (scope trigger)
audIo
THD + Noise ...................... <0.008% typical @ +6 dBu (1.55 V), 1 kHz
0.18% @ -38 dBu (9.75 mV), 20 Hz to 20 kHz
Flatness ........................... ±0.05 dB @ 20 Hz to 20 kHz
Accuracy .......................... ±0.4 dB
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
audIo ouTPuT
Number / Signal type ........... 1 mono, balanced; 2 mono, unbalanced
Connectors ....................... (1) 3.5 mm mini stereo jack (unbalanced mono left and right, tip-ring-sleeve)
1 female RCA jack (unbalanced, tip-ring)
1 male 3-pin XLR (balanced) (pin 1 = GND, pin 2 = +, pin 3 = -)
Impedance ........................ 50 ohms unbalanced, 100 ohms balanced
Waveforms ....................... Pink noise, white noise, sine wave (fixed/swept burst), square wave, polarity test
Level ranges ..................... Pink noise: -72 dBu to -4 dBu (-74 dBV to -6 dBV) (0.20 mV to 500 mVrms)
Polarity test: -72 dBu to -14 dBu (-74 dBV to -16 dBV) (0.20 mV to 158 mVrms)
All other signal types: -72 dBu to +6 dBu (-74 dBV to +4 dBV) (0.20 mVrms
to 1.58 Vrms)
Maximum level (Hi-Z) ........... >+6 dBu, balanced or unbalanced at 1% THD+N
Maximum level (600 ohm) ..... >+4.66 dBu, balanced or unbalanced at 1% THD+N
Crest factor (pink noise) ......... 3.25 (10.24 dB)
Crest factor (white noise) ....... 1.98 (5.95 dB)
Rise time (square wave) ......... 1.5 ms at 20 Hz to 7 µs at 5 kHz
Rise time (polarity test) .......... 5 µs
Frequency accuracy
(sine wave) ......................... 50 ppm
conTroL / reMoTe
—
TesT GeneraTor
Serial control port ............... RS-232, 9-pin female D connector
Baud rate and protocol ......... 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin
configurations ................... 2 = TX, 3 = RX, 5 = GND
Program control ................. Extron’s control/configuration program for Windows
®
Extron’s Simple Instruction Set (SIS
™
)
GeneraL
Power .............................. 100 VAC to 240 VAC, 50/60 Hz, 15 watts, internal
Temperature / Humidity ........ Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Rack mount ...................... No
Enclosure type ................... Metal
Enclosure dimensions .......... 6.75" H x 9.0" W x 1.75" D
17.1 cm H x 22.9 cm W x 4.4 cm D
(7.5" [19.1 cm] H including connectors.)
Product weight .................. 3.3 lbs (1.5 kg)
Shipping weight ................. 7 lbs (4 kg)
Vibration .......................... ISTA 1A in carton (International Safe Transit Association)
Listings ............................ UL, CUL
Compliances ..................... CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF .............................. 30,000 hours
Warranty .......................... 3 years parts and labor
NOTE: All nominal levels are at ±5%. Specifications are subject to change without notice.
VTG 400D
teSt GeneratorS & MeaSureMent productS
681
 previous next