Filter
Top Products
Safety
Safety and Instructional Decals
• Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
• Replace all worn, damaged, or missing safety
signs.
• When replacement components are installed, be
sure that current safety signs are afxed to the
replaced components.
• If an attachment or accessory has been installed,
make sure current safety signs are visible.
• New safety signs may be obtained from
your authorized Exmark equipment dealer or
distributor or from Exmark Mfg. Co. Inc.
• Safety signs may be afxed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
• Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Exmark commercial mower.
39-5770
For Units without a Blade Brake Clutch
(MPKA21, MPKA21CA, MSKA21, MSKA21CA,
and MSHN21)
43-8480
For Units with a Blade Brake Clutch
(MSKA21B, MSHN21B, and MSKA21BCA)
52-2610
For Push Units
(MPKA21 and MPKA21CA)
52-2620
For Self-Propelled Units
(MSKA21, MSKA21CA, MSKA21B, MSKA21BCA,
MSHN21, and MSHN21B)
68-7410
Common to All Units
9