Filter
Top Products
Product Overview
*60 inch units which already have an under toe board
mount weight as standard requires 116-1238 front toe
board top mount kit instead of 116-1173.
Torque Requirements
Bolt Location
Torque
Blade Drive Sheave
Mounting Nut
90-110 ft-lb (122-149 N-m)
Cutter Housing Spindle
Nut
160-185 ft-lb
(217-251 N-m)
Blade Mounting Bolt
(lubricate with anti-seize)
55-60 ft-lb (75-81 N-m)
Anti-Scalp Roller Nyloc
Nut See Figure 18
30-35 ft-lb (41-47 N-m)
Anti-Scalp Roller Hex
Capscrew See Figure 18
50-55 ft-lb (68-75 N-m)
Engine Mounting Bolts
(Kohler 680 & 740)
(Kohler 749)
(Kohler 940)
(Kohler 980)
(Kawasaki 801)
27-33 ft-lb (37-45 N-m)
27-33 ft-lb (37-45 N-m)
17-21 ft-lb (23-28 N-m)
17-21 ft-lb (23-28 N-m)
27-33 ft-lb (37-45 N-m)
Wheel Lug Nuts
90-95 ft-lb (122-129 N-m)
Wheel Motor Mounting
Bolts
72-77 ft-lb (98-104 N-m)
Wheel Hub Slotted Nut 211-260 ft-lb
(286-352 N-m)
Rollover Protection
System (Roll Bar) 1/2
inch Mounting Bolts
75-80 ft-lb (102-108 N-m)
Clutch Retaining Bolt
(secured with threadlocker)
55-60 ft-lb (75-81 N-m)
Hydro Park Brake
Cable Anchor 1/2 inch
Mounting Bolt (secured
with threadlocker)
67-89 ft-lb (91-121 N-m)
Product Overview
Figure 4
1. Rollover Protection
System (ROPS)
5. Fuel cap
2. Engine Controls (right
console)
6. Height of cut adjustment
3. Seat belt
7. Parking brake
4. Motion control levers
20