Filter
Top Products
Specications
– Moving motion control levers outward (in
slots) locks the drive system in neutral.
• PTO Engagement Switch: Engages electric clutch
(to drive belt) which engages mower blades.
• Parking Brake Lever: Engages/Disengages
parking brake.
• Deck Height Adjustment Lever: Sets cutting
height to desired position.
• Deck Lift Pedal: Foot pedal that lifts deck.
• Transport Lock:
– Latching position: Automatically latches at
the transport position.
– Unlatching position: Deck does not latch at
the transport position.
Seat
• Type:
– For all units except LZX801KA606SS,
LZX940KC606, LZX940KC726,
LZX980KC606, LZX980KC726: Standard
seat with high back, extra wide foam padded
seat cushion with internal suspension, thick
bolstering, two-tone cover, armrests, integral
safety switch, and seat vibration isolation
system.
Optional seat accessories for units with
standard seats:
◊ Custom ride suspension system to enhance
Standard Seat. Adds approximately 3
inches (7.6 cm) to seat height.
◊ Deluxe suspension (adjustable spring
suspension) seat with high back, armrests,
and integral safety switch. Seat height
remains the same.
– For LZX801KA606SS, LZX940KC606,
LZX940KC726, LZX980KC606,
LZX980KC726:
Deluxe suspension (adjustable spring
suspension) seat with high back, armrests, and
integral safety switch. Seat height remains the
same.
• Mounting: Hinged seat frame to tilt up seat. Held
in tilted position with prop rod. Adjustable fore
and aft on seat tracks.
• Armrests:
– Standard seat: foam padded adjustable ip-up
armrests.
– Suspension seat: molded adjustable ip-up
armrests.
• Seat Safety Switch:
Integrated seat switch. Time delay seat switch
eliminates rough ground cut-outs.
Hydrostatic Ground Drive System
• Two unitized hydrostatic transmissions:
– 48 and 52 inch decks:
◊ 12cc Parker axial piston pump
◊ 240cc Parker geroler motor
– 60 and 72 inch decks:
◊ 16cc Parker axial piston pump
◊ 280cc Ross geroler motor
• Hydraulic Oil Type: Exmark Premium Hydro Oil.
• Hydraulic Oil Capacity: 52 oz (1.5 L) per side
• Hydraulic Filter: P/N 116-0164
• Speeds:
– 12cc
◊ 0-10 mph (16.1 km/hr) forward.
◊ 0-5.5 mph (8.9 km/hr) reverse.
– 16cc
◊ 0-11.5 mph (18.5 km/hr) forward.
◊ 0-6 mph (9.7 km/hr) reverse.
• Drive wheel release valves allow machine to be
moved when engine is not running.
17