Filter
Top Products
- 8 -
1.6 SAFETY SIGNS
1.6.1 Keep all safety signs legible. Remove all grease, dirt, and debris from safety
signs and instructional labels.
1.6.2 Safety signs must be replaced if they are missing or illegible.
1.6.3 When new components are installed, be sure that current safety signs are affixed
to the replaced components.
1.6.4 New safety signs may be obtained from your authorized Exmark equipment
dealer or distributor or from Exmark Mfg. Co. Inc.
1.6.5 Safety signs may be affixed by peeling off the backing to expose the adhesive
surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.
1.6.6 Familiarize yourself with the following safety signs and instruction labels. They
are critical to the safe operation of your Exmark commercial mower.
PART NO. 1-403005
LOCATION: Left and Right Corners
of Mower Deck
PART NO. 1-303508
LOCATION: Front Right Corner
Top of Mower Deck
PART NO. 1-513742
LOCATION: On Top of Mower Deck Belt
Shields, Left and Right Sides
PART NO. 1-513746
LOCATION: On Engine
Blower Housing
PART NO. 1-523552
LOCATION: Top of Hydraulic
Reservoir
PART NO. 1-643401
LOCATION: On Tilt Switch
PART NO. 98-5954
LOCATION: Under Mower Deck
Belt Shield(s)
PART NO. 1-513748
LOCATION: Bottom of
Floorpan
PART NO. 103-3995
LOCATION: Center of Console
PART NO. 106-6571
LOCATION: Top Center of Floorpan