Filter
Top Products
Safety
Safety
Safety Alert Symbol
This Safety Alert Symbol (Figure 2) is used both in
this manual and on the machine to identify important
safety messages which must be followed to avoid
accidents
This symbol means: ATTENTION! BECOME
ALERT! YOUR SAFETY IS INVOLVED!
Figure 2
1. Safety alert symbol
The safety alert symbol appears above information
which alerts you to unsafe actions or situations
and will be followed by the word DANGER,
WARNING, or CAUTION.
DANGER: White lettering / Red background.
Indicates an imminently hazardous situation which, if
not avoided, Will result in death or serious injury.
WARNING: Black lettering / Orange background.
Indicates a potentially hazardous situation which, if
not avoided, Could result in death or serious injury.
CAUTION: Black lettering / Yellow background.
Indicates a potentially hazardous situation which, if
not avoided, May result in minor or moderate injury.
This manual uses two other words to highlight
information. Important calls attention to special
mechanical information and Note emphasizes
general information worthy of special attention.
Safe Operating Practices
Training
• Read the tractor and StandOn Operator’s Manuals
and other training material. If the operator(s) or
mechanic(s) can not read English it is the owner’s
responsibility to explain this material to them.
• Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
• All operators and mechanics should be trained.
The owner is responsible for training the users.
• Never let children or untrained people operate
or service the equipment. Local regulations may
restrict the age of the operator.
• The owner/user can prevent and is responsible
for accidents or injuries occurring to himself or
herself, other people or property.
• Only allow the machine operator on the StandOn.
Preparation
• Do Not modify the StandOn.
• Evaluate the terrain to determine what accessories
and attachments are needed to properly and safely
perform the job. Only use on machines approved
by Exmark.
• Wear appropriate clothing including safety glasses,
substantial footwear, long trousers, and hearing
protection. Do Not operate when barefoot or
when wearing open sandals.
CAUTION
The machine that the StandOn attaches to
produces sound levels in excess of 85 dBA at
the operator’s ear and can cause hearing loss
through extended periods of exposure.
Wear hearing protection when operating this
machine.
• Inspect the area where the equipment is to be
used and remove all rocks, toys, sticks, wires,
bones, and other foreign objects which can be
thrown by the machine and may cause personal
injury to the operator or bystanders.
Operation
• Operate only in daylight or good articial light,
keeping away from holes and hidden hazards.
• Stop engine, wait for all moving parts to stop,
remove key and engage parking brake whenever
you leave the mower.
Slope Operation
Use Extreme caution when mowing and/or turning
on slopes as loss of traction and/or tip-over could
occur. The operator is responsible for safe operation
on slopes.
5