Filter
Top Products
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
Unpacking Your Pressure Washer
This high pressure washer is suitable for
non-professional use. The working
temperature must range between 40°F
and 120°F. The machine is supplied with
a trigger gun, equipped with a trigger
handle to offer a comfortable working
position.
The high pressure washer is suitable for
washing with cold water only. The water
that you use for the pressure washer
must not be dirty, sandy or contain any
corrosive chemical products.
The pressure washer may be used to
wash shutters, doors, tiles, cars, decks,
campers, etc., where high water pressure
is necessary to remove dirt.
With the soap dispenser, the pressure
washer can be used to apply a thick
coating of aerated detergent to the areas
being cleaned .
When using the pressure washer we
recommend the use of personal safety
items to reduce the risk of accidental
injury.
After you open the package, check to
make sure that all the parts are in the box
as per parts that are illustrated on page 3
of this guide. Due to transport and
packing restraints, some accessories
may be supplied unassembled; in this
case follow the assembly instructions in
this manual. If you have any questions,
call Euro-Pro Operating LLC customer
service at 1 (800) 798-7398. Keep all
small and potentially harmful parts of the
packaging (plastic bags, foamed
polystyrene, nails, etc.) out of the reach
of children.
Suitable Use of Your Pressure
Washer
• Place the pressure washer in a safe
area and on a horizontal surface.
• When using the pressure washer,
hold the trigger gun firmly with one
hand on the handle and the other on
the lance. (Fig. 1)
Correct Use of the Pressure
Washer
Fig. 1
• NEVER point the water jet at electric
wiring, at the pump unit, or at any
person or animal.
4
CAUTION
Trigger
Lock
When you wish to stop using the
pressure washer temporarily, make sure
that the trigger lock has been engaged to
avoid any accidental operation. (Fig. 12)
Fig. 12
Using Brush With the Trigger Gun
The brush is used with the trigger gun.
Push the brush onto the trigger gun
nozzle and turn clockwise to lock as
you would for the lance. (Fig. 15) The
brush may be used for washing cars,
boats, windows and other similar items.
The brush operates at open orifice
pressure so it will not direct a stream of
water.
Fig. 15
7
OPERATING INSTRUCTIONS
Fig. 16
Using the Adjustable Lance
The angle of the water on the adjustable
lance may be adjusted between 0° and
60° by turning the nozzle adjuster
counter-clockwise for a wider angle or
clockwise for a narrower angle. (Fig. 13 &
Fig. 14) Always make sure that the
"On/Off' switch is in the "Off" position
before changing the angle of the water
jet. It is also recommended that the
trigger gun safety lock be engaged as
well. The adjustable lance allows you to
use any variety of spray pattern from a
full fan spray to a direct stream spray.
When using the pressure washer to clean
wood decks, siding, vehicles, etc., always
start using the fan spray and begin
spraying from a minimum 36" away to
avoid damaging the surface of the
material that you are cleaning. Always
clear the area that you will be cleaning; of
people, pets and objects.
Fig. 13
Counter-clockwise
Clockwise
Fig. 14
Using Detergent with the Pressure
Washer
The soap dispenser may only be used
with the trigger gun.
Add detergent to the bottle and then
attach the soap dispenser to the
adjustable lance, just push it firmly onto
the end of the trigger gun until it snaps
into place. (Fig. 16)
Fig. 17
To remove the soap dispenser, lift the
tab on the top of the connector and pull
off. (Fig. 17)