Filter
Top Products
Battery Removal & Disposal
NOTE: If uncertain as to how to remove your battery pack, we
suggest you take your sweeper to a reputable small
appliance service technician to have this service performed.
Follow these steps when battery removal is required.
This sweeper is equipped with Ni-Cd batteries and you need to dispose of them
properly. When the batteries are no longer good for use, they must be removed from
the sweeper for disposal. Do not remove the batteries for any reason other than
disposal of them. Call your nearest recycling center for information on the
recycling and disposal of Ni-Cd batteries.
Model: V1725H
4.8 Volt DC
WARNING
: You must never use ordinary batteries for replacement
as these may leak and cause damage. Use only
battery pack X9725H provided by EURO-PRO
Operating LLC for replacement.
Removal of Battery Pack
1. Remove the extention handles and dust cup container.
2. Turn unit over so that the base is facing upwards. Be careful not to turn the unit
ON. (Fig. 9)
3. Push in locking tab and lift off battery compartment cover. (Fig. 10)
4. Lift out battery pack and set aside.
5. Insert the new battery pack into unit, ensuring that the Positive (+) terminal of
the battery pack corresponds with the positive (+) making inside the battery
compartment. Replace the battery compartment cover making certain that the
locking tab snaps in place.
IMPORTANT: This appliance contains Ni-Cd batteries. The batteries
must be recycled or disposed of in accordance with local
regulations. Please consult your Yellow Pages or local
recycling center for more information.
Fig. 9
Locking
Tab
Fig. 10
7. Charging Jack
8. Lower Handle
9. Metal Extension Handles
10. Upper Handle
11. Charging Adapter: Use Only
TechWorld AD-0815-U8 7,5V-150mA
1. Sweeper Power Head
2. On / Off Switch
3. Charging Light Indicator
4. Dust Cup (Container)
5. Rotating Brush
6. Transparent Brush Cover
Illustrations may differ from actual product.
NOTE: Cordless Sweeper Model V1725H is shipped with the
batteries uncharged. Charging of the unit for 20 hours
prior to first use is required. Use replacement battery
#
X9725H only.
7
2