Filter
Top Products
4
How To Assemble (continued)
7
Pull the electrical cord up
to the cord retainer and
firmly push down into
retainer. This will keep the
cord out of the way the
next time you vacuum.
Wind the cord around the
two cord hooks on the
back of the vacuum.
Secure plug to the cord to
prevent unwinding.
Store the wands on the
side of the vacuum in
front of the hose.
Store the dusting brush.
8
9
10
11
How To Use
Helpful Information:
Listen to your cleaner. If you notice a change in the
sound of the motor or a change in performance, it could
simply indicate a common usage or maintenance
issue. Such as, a need to raise or lower the carpet
height adjustment, possible blockage in hose or brush
roll area, or a broken or loose brush roll belt. These
are all easy to fix and the instructions are included in
this owner’s guide. Becoming familiar with the
information in this guide will help you to get the best
possible performance from your new cleaner for many
years to come.
ON/OFF Switch.
International symbol I
means On, International
symbol O means Off.
Handle Release. Step on
handle release to pull handle
back to a comfortable
operating position. To lower
handle completely to the floor,
depress handle release a
second time.
Cleaner Height Setting. An adjustment that raises or
lowers the cleaner base to match the type of floor surface.
With the cleaner cord unplugged, set the adjustment to lowest
setting for maximum carpet cleaning. If the cleaner is difficult
to push, move adjustment to next highest setting until
cleaner is comfortable to push. The brush roll must reach
the carpet for effective cleaning. For ease in moving the
adjustment knob, place handle in operating position and tilt
cleaner back to remove weight from front wheels.
Helpful Information:
Before cleaning under low
furniture, check area first for
objects that might harm the
unit or block the vacuum
hose.
WARNING: Avoid injury. Keep loose clothing, hair,
fingers, and all other parts of body away
from any moving part (such as the
revolving brush). Turn off the switch and
unplug the cleaner before changing the
cleaner height setting.