Filter
Top Products
3
Assembly Parts
Wand and Crevice Wand. (Pull apart.)
Dusting Brush.
Hose.
Vacuum Cleaner Body.
Electrical Cord.
Handle.
Screws located in the accessory package.
1
2
3
4
6
5
1
2
3
4
5
6
How To Assemble
CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts, make sure ON/OFF switch is in
the OFF position before plugging in.
1
Grasp dust bag cover
handle and pull away from
vacuum body to remove
door.
2
Slide the handle into the
grooves at the top of the
vacuum body as shown.
Place the two screws
(supplied)into the holes at
the top of the bag
compartment and tighten
with a screwdriver.
3
4
Place the tabs on the
bottom of the dust bag
cover into slots at the
bottom of the bag
compartment and rotate
door up and push against
the vacuum body until it
snaps shut.
5
Place the hose on the
back of the vacuum,
wrapping it up and over
the hose hook as shown.
Firmly push the end of the
hose into the hose
retainer in the hood of the
vacuum.
6
7