Filter
Top Products
FR1000 OWNER’S MANUAL
24
Your FR1000 Series can be used to charge a mobile phone by the
DYNAMO CRANK, or AC Adapter
• Set the BATTERY SOURCE switch to DYNAMO-ADAPTER posi-
tion.
• Open the PHONE CHARGER jack rubber cap on the side radio.
• Attach a Charging Cable
• Connect the other end of the Charging Cable to the PHONE
CHARGER jack of the FR1000.
• Recharge the mobile phone battery by turning rapidly the DYNAMO
CRANK, or by attaching the AC Adapter in the Charging Jack.
Note: Charging a mobile phone through the Phone Charger Jack is
intended for emergency purpose only. It is not intended for recharg-
ing fully a discharged battery.
PHONE CHARGER JACK