Filter
Top Products
GETTING STARTED
GETTING STARTED
Before operation, please study the manual to get familiar with basic functions
and features of the unit. The unit does not have an On/Off switch and the LCD
will illuminate once the batteries are inserted. However, the radio can be set to
NOAA-on, NOAA stand-by, NOAA-mute, or NOAA-off positions.
Note: Keeping the radio permanently on, will consume substantially more
power. Subsequently, NOAA stand-by is recommended when the user is not
listening to radio broadcasts.
INSTALLING THE BATTERIES
The unit uses 3 x AA 1.5V alkaline batteries.
1. Gently push toward to open the battery door
2. Flip-up the battery door and insert with new batteries strictly according to
the polarities shown
3. Replace the battery door
DISPLAY MODES
There are three lines of display indications:
1 st line displays clock
2 nd line displays variables Alarm 1/Alarm 2/Temperature/Calendar by pressing
(DISP/SNZ/SET) button
3 rd line displays radio station frequencies, pre-set memory, and NOAA channel
indicator when channel is being set.
Note: Before setting any data, please note that if no data is input within 15
seconds, the original data will resume on the display.
HOW TO SET THE ALARMS
ALARM 1
1. Press and hold (DISP/SNZ/SET) for 2 seconds (to set ALARM 1 mode)
2. Press Up/Down (+/- tuning key) to set Hour
3. Press (STR/RCL) once to flash minute
4. Press Up/Down (+/- tuning key) to set minute
5. Press (RADIO) to activate/deactive the alarm (“The bell” symbol appears in
the display when the alarm is activated).
6. Press (DISP/SNZ/SET) once to return to normal
7
A. NOAA
Change NOAA weather radio operation mode (Monitor/Standby/Mute/Off)
and change for channels frequencies from 1 to 7
B. Up/Down volume (< vol >) button
Adjustment to high or low volume at your desired
C. Radio
Change radio operation mode to (FM/AM/OFF) and change Alarm on/off
function
D. Display/Snooze/Set (DISP/SNZ/SET)
- Change LCD display mode to (Alarm 1/Alarm 2/Calendar/Thermometer),
and when alarm is activating, press once to enter snooze mode; and if
weather alert is activating, press once to turn off the alert.
- Press and hold 2 seconds to enter SET mode for Alarm1/Alarm2/Time/
Calendar/12- 24/county code setting.
E. Store/Recall (STR/RCL)
Store and recall the radio station memories
F. Up/Down tuning (+/- tuning) button
Up/Down tuning for radio stations or selection of pre-set memory; and
change of setting mode
G. Stereo headphone jack
H. AC/DC adapter jack
I. Detachable antenna
J. Detachable Belt-Clip
6
OPERATION GUIDE
A
B
C
G
H
F
E
D
I
J
DESCRIPTION AND FUNCTIONS OF PARTS