Filter
Top Products
15
4. Sequentially press the F5 button until the beginning FM
frequency of your area appears.
5. Give the PAGE/TIME button (4) a quick, short press.
TUNING IN STATIONS
Described below are four methods of tuning-in stations: Buttons
(6), Tuning-Knob (40), Direct Frequency Entry (9) and Auto-Scan (6).
BUTTONS (6)
Quick, short, sequential presses of the buttons enables tuning
up or down frequency (33)(34)(35). All normal tuning for AM, FM
and shortwave stations can be performed with the buttons.
The tuning steps used are 9 or 10 kHz in the AM band, 5 kHz in the
shortwave bands and 100 kHz in the FM band.
TUNING KNOB (40)
The tuning steps are 1 kHz in AM/SW and 25 kHz FM.
DIRECT FREQUENCY ENTRY (9)
Use this method when the desired frequency of a radio station is
known. AM and SW frequencies are entered in kilohertz (KHz), e.g.
810 KHz or 9475 KHz.; FM frequencies are entered in megahertz
(MHz), e.g. 102.9 MHz, ignoring the decimal point.
To enter a frequency:
1. Use the numeric buttons (9) to enter the frequency.
2. Within 3 seconds, press the AM ‘enter’ button (10) if it’s an AM or
SW frequency, or the FM ‘enter’ button (12) for FM frequencies.
Here’s an example for an AM station at 810 kHz (For FM, ignore the
decimal point and use the FM enter button (12)):
5 BASIC RADIO OPERATION continued
E5 OWNER’S MANUAL
E5 OWNER’S MANUAL