Filter
Top Products
SOLARLINK FR600 OWNER’S MANUAL
6
position to turn it on. Turn it off by placing the Band Selecting
Knob in the OFF position.
Note: The radio can be played while it’s charging.
BATTERY POWER
Open the battery compartment cover, you can nd two groups
of sockets for installing the batteries. One group of sockets is
for the rechargeable Ni-MH batteries and the other group of
sockets is for the AA batteries.
Install 3 AA batteries and set the power selector switch to the
BATTERY position.
SOLAR POWER
When you’re in sunlight set the power switch to the SOLAR
position. This position also recharges the Ni-MH rechargeable
battery.
Note: The rechargeable Ni-MH batteries have been disconnect
for transportation purposes. To use the crank-charge system,
open the battery compartment cover and connect the
rechargeable batteries’ plug into its socket.
DYNAMO POWER
The rechargeable Ni-MH (nickel-metal-hydride) battery is in the
battery compartment. To use it plug the battery into the socket
adjacent to it, then set the power switch to the DYNAMO
position. You may have to charge the battery; to do this turn
the crank for 90 seconds. The rechargeable battery will
eventually lose its ability to hold a charge.