Eton ARCFR600R Weather Radio User Manual


 
17
SOLARLINK FR600 OWNER’S MANUAL
3) Press or shortly to select the “COUNTY CODE” option.
4) Press <SELECT> shortly once to enter the county code
setting mode (MULTI, SINGL or ALL), which blinks in the
display.
5) If you don’t know your county code, select ALL with or
and press <SELECT> and then <MENU> TO EXIT. If you
know your code, don’t press SELECT and go to the next
section.
6) Press or shortly to select MULTI or SINGL and press
<SELECT>.
7) Press <SELECT> shortly again to enter the code. CODE 01
XXXXXX appears in the display, with 01 ashing.
8) Press <SELECT> again and the rst digit of six starts
ashing. Press or to set the rst digit and then press
to go to the second digit, doing this again and again until
all six digits are entered.
9) If you’re in SINGL, press <SELECT> and then <MENU> to
exit. If in MULTI, go to the next step.
10) If you’re in MULTI and wish to enter more codes, press
<SELECT>.
11) 01 ashes. Press or to go to another code setting
number (1-23 ashes) and press <SELECT>.
12) The rst digit of six ashes, use or to set it and press
to enter the next number, doing this again and again
until all six digits are entered.
13) Press <SELECT> to choose another code number (1-23)
and when your finished press <SELECT> and then MENU
to exit.