Filter
Top Products
2
ETÓN SOUND 100 OWNER’S MANUAL
Owner’s manual; remote control.
Grip the plastic piece on the bottom of the remote unit and pull it out.
Plug the Etón Sound Radio Power Cord into an AC (mains) outlet.
When it is rst plugged in, it will be in the standby mode. In standby
mode, only the clock display is activated and the radio is off. To turn
the radio on, use a quick, short press of the power button that’s on
the radio or the remote. To place it back into standby mode, use a
quick, short press of the power button.
On the rear of the radio is a backup battery compartment that holds
2 AA alkaline batteries for backup of memories, clock and alarm func-
tions. Use only new batteries of exactly the same brand and type.
The batteries are not included.
The volume is controlled with the volume knob or the VOL buttons
on the remote. Turning the volume knob clockwise increases the
volume; counterclockwise decreases volume. Pressing the remote’s
VOL + increases the volume; pressing the VOL — button decreases
the volume.
WHAT YOUR ETÓN SOUND RADIO INCLUDES
PREPARING YOUR REMOTE FOR USE
POWERING THE ETÓN SOUND RADIO
BACKUP BATTERIES
VOLUME CONTROL