Filter
Top Products
11
Setting The Date And Time
Note: The month and date are displayed numerically (MM/DD).
For example, February 28
th
is displayed as “2 28”.
1.) Press the MODE button twice. The Month display
appears.
2.) Press the SET button repeatedly to advance the display to the correct month.
3.) Press the MODE button again. The Day display
appears.
4.) Press the SET button repeatedly to advance the display to the correct day.
5.) Press the MODE button again. The Hour display
appears together with either the “A” (AM) or “P”
(PM) indicator.
6.) Press the SET button repeatedly to advance the display to the correct hour,
AM or PM.
7.) Press the MODE button again. The Minutes
display appears.
8.) Press the SET button repeatedly to advance the display to the correct minute.
9.) Press the MODE button once more, then press
the SET button. The clock begins to run.
Note: To see the date at any time, press the SET button. The display will
change from time to month/date for a few seconds and then change back to
time display automatically.
RP1103_010505.p65 5/1/2005, 11:4911