Emerson RP1103 Weather Radio User Manual


 
9
Radio Operation
1.) Turn on the radio by rotating the VOLUME control clockwise.
2.) Move the Band Selector switch to select the desired band (AM, FM/TV1 or
TV2).
Select AM to tune AM radio stations.
Select FM/TV1 to tune FM radio stations and TV channels 2 through 6.
Select TV2 to tune TV channels 7 through 13.
3.) Tune the desired station by rotating the TUNING control.
4.) Adjust the VOLUME control as desired.
5.) To turn the unit Off, rotate the VOLUME control counterclockwise until a
click sound is heard.
Weather Band Operation
This radio receives continuous U.S. Government Weather Broadcasts from the
National Oceanic and Atmospheric Administration (NOAA), part of the Department
of Commerce. This National Weather Radio service includes more than 750
transmitters covering all 50 states and adjacent coastal waters, Puerto Rico, the U.
S. Virgin Islands, and the U.S. Pacific Territories. The weather broadcasts are
transmitted on seven separate bands from 162.400 MHz to 162.550 MHz.
To hear the weather reports, press the WEATHER button on the top cabinet at any
time. If you were listening to another band the radio will automatically switch to the
weather band.
The volume level is fixed at optimum listening level on Instant Weather operation.
In order to increase or decrease the volume level, turn the volume control up or
down.
Note: Since the National Weather Radio transmitters operate at much lower
power than commercial radio stations, the volume on the weather band
will be lower than for AM/FM or TV bands. This is normal and not an
indication of any trouble with your unit. Adjust the VOLUME when listening
to the Weather Band if necessary.
OPERATING INSTRUCTIONS
RP1103_010505.p65 5/1/2005, 11:499