Filter
Top Products
must be on firm ground:
1. fit the grass-catcher;
2. connect a water hose to its pipe fitting (1), and
run water through it;
3. sit at the operator’s position;
4. lower the cutting deck completely;
5. start the engine and stay in neutral;
6. engage the blade and leave it to turn for a few
minutes.
Take off the grass-catcher, empty and rinse it, then put it in a position where it can
dry quickly.
Put the machine away in a dry place protected from the weather and, if possible,
cover it with a cloth.
5.4.11 I
NACTIVITY FOR LONG PERIODS
Carefully remove any dry grass cuttings which may have
collected around the engine or silencer to prevent their catching fire the
next time the machine is used!
If the machine is likely to be unused for a long period (more than 1 month), follow
the instructions in the engine manual. Lubricate all joints as indicated (☛ 6.2.1).
In the electric start models:
Disconnect the connectors (2 and 3) of the
battery (1).
The battery must be kept
in a cool and dry place. Before a long stor-
age period (more than 1 month), always
charge the battery, and then recharge
before using again (
☛
6.2.5).
Empty the fuel tank by disconnecting the tube situated at the inlet of the fuel filter
IMPORTANT
➤
̆
!
WARNING!
EN 24 HOW TO USE THE MACHINE
1
32
1