EMAK RIDING MOWER Lawn Mower User Manual


 
EN 23HOW TO USE THE MACHINE
5.4.8 END OF MOWING
When you have finished mowing, disengage the blade, lower the engine speed
and ride the machine with the cutting deck in the highest position.
5.4.9 E
ND OF WORK
Once you have finished mowing, stop the machine and engage the parking brake.
In the electric start models:
1. shift the accelerator lever to «SLOW»;
2. switch off the engine by turning the key to «STOP»:
Always take out the ignition key before leaving the
machine unattended!
To keep the battery charged, do not leave the key in the
«ON» position when the engine is not running.
In the manual start models:
1. shift the accelerator lever to «OFF».
Always make sure that the accelerator level is in the
«OFF» position before leaving the machine unattended!
5.4.10 C
LEANING AND STORAGE
Always empty the grass-catcher and do not leave con-
tainers full of cut grass inside a room.
After each mowing, clean the outside of the machine, empty the grass-catcher
and shake it to remove residual grass and earth.
Clean the plastic parts of the body with a damp sponge using water and deter-
gent, taking care not to wet the engine, the electrical parts or the electronic card.
Never use hose nozzles or harsh detergents for cleaning the
body and engine!
For washing the inside of the cutting deck and the collector channel the machine
IMPORTANT
̆
!
WARNING!
̆
!
WARNING!
IMPORTANT
̆
!
WARNING!