Elation Professional S-100 II Snow Blower User Manual


  Open as PDF
of 4
 
Important: Always monitor tank fluid level during operation. Running a snow machine with no
fluid can permanently damage the unit.
If you experience low output, mechanical noise or no output at all, unplug immediately. Check
fluid level, the external fuse, remote connection, and power from the wall. If all of the above
appears to be O.K., plug the unit in again. If snow does not come out after holding the remote
button down for 30 seconds, check the hose attached to the tank to make sure there is fluid
going through the hose. If you are unable to determine the cause of the problem, do not simply
continue pushing the remote button, as this may damage the unit. Return the machine to your
ANTARI dealer.
Maintenance
Do not allow the snow liquid to become contaminated. Always replace the caps on the snow
liquid container and the snow machine liquid tank immediately after filling.
Before storing, flush out system with clean water.
Snow Liquid
Depending on the desired effect, use either ANTARI SL-5 Snow Liquid for normal snow or
ANTARI SL-5A Snow Liquid for fast-dissipating snow.
Save these instructions
 previous