Elation Professional S-100 II Snow Blower User Manual


 
User Manual
Antari Snow Machine
Congratulations on the purchase of your new
ANTARI Snow MACHINE.
Introduction
Thank you for choosing an ANTARI Snow Machine. You now own a rugged and powerful state-
of-the-art machine. Prior to use, we suggest that you carefully read all of the instructions. By
following the suggestions found in this user manual, you can look forward to the reliable and
satisfactory performance of your ANTARI Snow Machine for years to come.
Please follow these operation, safety and maintenance instructions to
ensure a long and safe life for your snow machine.
Cautions
Danger of electric shock
Keep this device dry.
For inside use only. Not designed for outside use.
For the 110V models, use 3-prong grounded electrical outlet only. Prior to use take care to
determine that the unit is installed at the rated voltage.
Always unplug your ANTARI Snow Machine before filling its tank.
Keep snow machine upright.
Turn off or unplug when not in use.
This machine is not water- or splash-proof. If moisture, water, or snow liquid gets inside the
housing, immediately unplug the unit and contact a service technician or your ANTARI
dealer before using it again.
No user serviceable parts inside. Refer to your ANTARI dealer or other qualified service
personnel.
For adult use only. Snow machine must be installed out of the reach of children. Never
leave the unit running unattended.
Never aim the output nozzle directly at people.
Locate the snow machine in a well-ventilated area. Never cover the unit’s vents. In order to
guarantee adequate ventilation, allow a free air space of at least 20 cm around the sides and
top of the unit.
Danger of explosion
Never add flammable liquids of any kind (oil, gas, perfume) to the snow liquid.
Pay attention to all warning labels and instructions printed on the exterior of your ANTARI Snow
Machine
Use only the high-quality snow liquid that your dealer recommends.
Always make sure there is sufficient liquid in the snow liquid tank.
If your ANTARI Snow Machine fails to work properly, discontinue use immediately. Drain all
snow liquid from the tank, pack the unit securely (preferably in the original packing material),
and return it to your ANTARI dealer for service.
Unpacking & Inspection