Filter
Top Products
Page 9
EZ Trim Mower Owners Manual
4.1 PARALLEL TRIMMING (MODELS
73265, 73350, & 73455)
The EZ Trim Mower trimmer body can be adjusted to mow
at an angle. The trimmer body will move up to 2" to the left
or the right. This allows the machine to edge and trim in
hard to reach places. To adjust the parallel trimming setting:
1. Loosen two nuts on the bottom of the trimmer called
out in Fig. #4; the first (A) is located behind the
trimmer spindle, while the other (B) is in the center of
the back of the transmission support plate. Do not
adjust parallel trimming with the trimmer axle. This
will cause the drive chains to fall out of adjustment.
2. Pivot the trimmer body, on the slotted holes, to the
left or right. The trimmer body can pivot either left or
right up to 2".
3. Tighten the nuts loosened in step #1.
4. When finished using the parallel trimming feature
loosen bolts A & B and place the trimmer body in the
original position.
5. Tighten the bolts and resume regular trimming or
mowing.
A
B