Echo X7532095603 Trimmer User Manual


 
14
BLADE ADJUSTMENT
Level 2.
Tools required: (2) 10 mm Sockets & Extensions
Parts required: None
WARNING
Hedge clipper blades are very sharp. Touching them may lead to
severe personal injury. Use a socket and extension when adjust-
ing blade bolts or blade locknuts in order to keep hands at a safe
distance from sharp blades.
1. Tighten blade bolts (A) until snug, then loosen blade bolts 1/2
turn.
2. Hold blade bolts (A) from turning using 10 mm socket & Exten-
sion, and tighten blade lock nuts (B) with other 10 mm Socket &
Extension.
NOTE
Locking ability of Hedge Clipper blade lock nuts will diminish
each time they are removed. Replace if turning resistance is not
felt when installing locknuts.
A
B