Echo X7532095603 Trimmer User Manual


 
PAS ARTICULATING HEDGE CLIPPER ATTACHMENT
OPERATOR'S MANUAL
11
MAINTENANCE
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete
stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing
service. Wear gloves to protect hands from sharp edges and hot surfaces.
Your ECHO trimmer is designed to provide many hours of trouble free service. Regular scheduled maintenance will
help your trimmer achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to
take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOUR-
SELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed see your ECHO
dealer for repairs.
SKILL LEVEL
Level 1 = Easy to do. Common tools may be required.
Level 2 = Moderate difficulty. Some specialized tools may be required.
MAINTENANCE INTERVALS
Component/System Maintenance Procedure Skill Level Frequency
Cutting Blades Oil/Clean 1 Before each use
Drive Shaft Grease 1 Every 25 hours of use
Gear Housing Grease 1 Every 15-25 hours of use
Screws/Nuts/Bolts Inspect/Tighten/Replace 1 Before each use
LUBRICATION
Blades
Level 1
Tools Required: Clean rag, brush, oil can
Parts Required: 20W Engine Oil (lubrication), 50-50 mixture of
kerosene and 20W oil (cleaning).
WARNING
Blades are very sharp. Wear gloves to protect hands, otherwise
serious personal injury may result.
1. Brush loose debris from blade and coat both sides of blade with the
50-50 cleaning mixture.
2. Allow cleaning mixture to soften the remaining gummy residue then wipe it
from the blade.
3. Apply clean oil to the entire length of the blade. Be certain the blade bolts
are lubricated.
4. Wipe excess oil from the blade before putting the unit back in service.