Filter
Top Products
GRASS TRIMMER/BRUSH CUTTER
OPERATOR'S MANUAL
15
2.REPLACING SPOOL
NOTE
Keep line tight on spool.
A. Snap spool into housing while pulling line through eyelets with
about 15 cm (6 in) extending out.
CAUTION
Knob tightens counterclockwise, “left”.
B. Fasten spool to housing with shaft bolt, spring, and knob.
OPERATING INSTRUCTIONS NYLON LINE
1. Always use the end of the line for cutting. Forcing the cutter head
too close to the work will result in reduced effi ciency and broken
line.
2. Maintain the line at the recommended length of 12.5 to 15 cm (5
to 6 in). A longer line will reduce engine speed, a shorter line may
result in engine damage.
3. The trimmer head rotates counterclockwise. Always cut with the
head tilted to the right to defl ect debris away from the operator.
4. Always observe the SAFETY RULES on Page 3 when using the
unit.
Housing
Bolt
Spring
Knob