Echo PAS-2100 TYPE 1E Brush Cutter User Manual


 
6
equIpment
WARNING
Use this attachment with ECHO approved models only. Serious injury may result from the use of this attachment
combined with a non approved ECHO product.
Before operation a complete check of the unit must be performed;
Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.
Inspect shield for damage and make sure it is securely in place. Replace if shield is damaged or missing.
Check that the cutting attachment is rmly attached and in safe operating condition.
Do not use trimmer if any part is missing or damaged.
Have repairs done only by an authorized ECHO Service dealer.
IMPORTANT
80-Tooth blade requires professional sharpening.
1
2
3
4
descrIptIon
Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instruc-
tions on them. If a decal cannot be read, a new one can be ordered from your ECHO Dealer. See PARTS ORDERING
instructions for specic information.
WARNING
Moving parts can amputate ngers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings.
ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop
before removing obstructions, clearing debris, or servicing unit.
DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.
NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.