Filter
Top Products
20
1. Remove mufer cover.
2. Remove starter cover and clean dirt and dust from ns.
IMPORTANT
DO NOT use a metal scraper to remove dirt from the cylinder ns.
3. Assemble components in reverse order.
e x h a u s T s y s T e m
Spark Arrestor Screen
Level 2.
Tools required: 4 mm Hex wrench, Cross Head Screwdriver, Soft
metal brush
Parts required: Screen, Gasket
1. Remove mufer cover.
2. Place piston at Top Dead Center (TDC) to prevent carbon/dirt from
entering cylinder.
3. Remove exhaust guide (A), gaskets (B), and screen (C) from muf-
er body.
4. Clean carbon deposits from mufer components.
NOTE
When cleaning carbon deposits, be careful not to damage the cata-
lytic element inside mufer.
5. Replace screen if it is cracked, plugged or has holes burned through.
6. Assemble components in reverse order.
A
B
C