Filter
Top Products
GRASS TRIMMER
OPERATOR'S MANUAL
9
SPECIFICATIONS
MODEL -----------------------------------------------------GT-2000EZR
Length ------------------------------------------------------- 1405 mm ( 55.3 in.)
Width--------------------------------------------------------315 mm (12.4 in.)
Height ------------------------------------------------------- 360 mm (14.2 in.)
Weight (dry) w/Cutter Head ------------------------------ 4.55 kg (10.0 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore ---------------------------------------------------------- 32.2 mm (1.268 in.)
Stroke-------------------------------------------------------- 26.0 mm (1.04 in.)
Displacement ----------------------------------------------- 21.2 cc (1.29 cu. in.)
Exhaust System --------------------------------------------Spark Arrestor Muffler
Carburetor -------------------------------------------------- Zama diaphragm model w/primer
Ignition System --------------------------------------------Flywheel magneto, capacitor discharge
Spark Plug -------------------------------------------------- Champion RCJ-7Y Gap 0.65 mm (0.026 in.)
Fuel ----------------------------------------------------------Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------------- 50:1 ECHO High Performance, two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------------------ 50:1 ECHO High Performance, two-stroke air cooled engine oil
Fuel Tank Capacity ---------------------------------------- 0.4 lit. (14.0 US fl. oz.)
Starter System ---------------------------------------------- Semi-automatic Recoil Starter Assist
Clutch -------------------------------------------------------Centrifugal Type
Drive Shaft -------------------------------------------------- 6.35 mm (1/4 in.) Flex Shaft
Rotating Direction ----------------------------------------- Clockwise viewed from top
Cutter Head ------------------------------------------------- Nylon line head (2-line) with .080 Line capacity 203 mm (8 in.)
Handle ------------------------------------------------------- Left - D-Loop, Right - Grip
Shoulder Harness ------------------------------------------ Optional P/N 99944200201
Idle Speed (RPM) ------------------------------------------ 2400 - 3200
Wide Open Throttle Speed (W.O.T.)
with Nylon Line Head (RPM) ----------------------------- 6800 - 7800