Filter
Top Products
23
Sh r e d 'N'Va c
®
O
p e r a t O r 'S Ma N u a l
s h r e d d e r
b l a d e
Level 1.
WARNING
Never remove vacuum tube or open fan guard when SHRED ‘N’
VAC
®
is running or serious personal injury may result. Always
wear heavy-duty work gloves when working in shredder blade area.
1. With engine stopped, remove spark plug wire, remove vacuum
tube from unit.
2. Remove accumulated debris from blade and inspect for damage.
IMPORTANT
Do not operate SHRED ‘N’ VAC
®
if shredder blade is damaged
or broken. Return unit to Echo Dealer for service.
3. Install vacuum tube. Refer to “Install Vacuum Tube and Bag
Assembly” (page 9) in assembly section for correct assembly
procedures.
d e b r I s b a g
Level 1.
Parts Required: None
Shake dust from bag and inspect for hole or tears. Inspect zipper and
clean debris from teeth to assure complete closing of zipper.