Echo CS-8000 TYPE1-E Chainsaw User Manual


 
4
CS-8000 TYPE1-E
TO AVOID KICKBACK
1. Hold the chain saw firmly with both
hands.
2. Don’t let the nose of the guide
bar contact any obstruction.
3. Tip contact may suddenly move the
guide bar upward and backward,
which may cause serious injury.
Part Number 890191-30131
Carburetor adjustment
- Idle speed
Carburetor adjustment
- High speed mixture
Carefully read the Instruction
manual
Wear eyes, ears and head
protection
Carburetor adjustment
- Low speed mixture
Oil and gasoline mixture
Symbol form/shape Symbol description/application Symbol form/shape Symbol description/application
Automatic oiler adjustment
Manual oiler
Chain oil fill
DECALS
Locate this safety decal on your unit. The complete
unit illustration found in the “NOMENCLATURE OF
PARTS” section will help you locate them.
Make sure the decal is legible and that you
understand and follow the instructions on it. If a
decal cannot be read, a new one can be ordered
from your ECHO dealer.
WARNING
Chain brake must be unlocked before removing or installing clutch
cover. Improper cover installation can result in serious injury and
cause severe damage to saw.
El freno de la cadena debe ser bloqueado antes de remover o de instalar
la cubierta del embrague. La instalación incorrecta de la cubierta
puede dar lugar a lesión seria y causar daño severo a la sierra.
Part Number X505-002040
Emergency stop
Choke control “Cold Start”
position (choke closed)
SYMBOL FORM
Part Number 890161-31733
WARNING!! Read and follow all safety
precaution in the instruction manual.
Failure to follow instructions could
result in serious personal injury.
CS-8000
WARNING!!
This chain saw is capable of severe kickback
that could result in serious injury to the user.
Do not operate this chain saw unless you
have extraordinary cutting needs and
experience and specialized training for
dealing with kickback. ECHO chain saw with
significantly reduced kickback potential
are available.
Part Number 890191-31731
REPLACEMENT BAR AND CHAIN
GUIDE BAR* CHAIN*
PART NO. TYPE LINKS
20” 20D0PS3870 OREGON 72LPX, 72LGX 70
24” 24D0PS3881 OREGON 72LPX, 72LGX 81
27” 27D0PS3893 OREGON 72LPX, 72LGX 93
32” 32D0PS3805 OREGON 72LPX, 72LGX 105
36” 36D0PS3816 OREGON 72LPX, 72LGX 116
*Or equivalent
Note: There may be other replacement
components for achieving kickback
protection. For details, please refer to
the chain and bar combination sheet
shown in the instruction manual.
Part Number X524-001672
STOP