15
CS-500P
WHEN THE ENGINE IS COLD
CAUTION
Make sure the bar and chain are free from
any obstruction when starting the chain saw.
s -OVECHAINBRAKELEVERFULLYFORWARDTOLOCK
chain brake before starting.
s &ILLTHEFUELTANKWITHFUELMIXTURE
It is not permitted to fill fuel above the shoulder
level of fuel tank.
s &ILLTHECHAINOILTANKWITHLUBRICANT
Do not over fill.
s -OVEIGNITIONSWITCHTOhI ” position.
s 0ULLCHOKECONTROLKNOBALLTHEWAYOUT
(Choke position
)
s 3ECURELYHOLDTHECHAINSAWASSHOWNAND
pull starter handle several times until first firing
sound.
s 0USHCHOKECONTROLKNOBALLTHEWAYIN
s 0ULLSTARTERHANDLEAGAINTOSTARTTHEENGINE
s 7HENENGINESTARTSIMMEDIATELYSQUEEZEAND
release throttle trigger for disengaging throttle
latch and returning engine to idle, and pull front
hand guard towards the operator immediately.
(Chain brake unlocked position)
WHEN THE ENGINE IS WARM
CAUTION
Make sure the bar and chain are free from
any obstruction when starting the chain saw.
s -OVECHAINBRAKELEVERFULLYFORWARDTOLOCK
chain brake before starting.
s #ONlRMTHEREISFUELANDCHAINOILINTHETANKS
s -OVEIGNITIONSWITCHTOhI ” position.
s 3ECURELYHOLDTHECHAINSAWASSHOWNANDPULL
starter handle.
s #HOKEMAYBEUSEDIFNECESSARYBUTAFTERlRST
firing sound, pull throttle trigger to release choke.
s !FTERSTARTINGTHEENGINEPULLFRONTHANDGUARD
towards the operator immediately.
(Chain brake unlocked position)
Ignition switch
Chain brake
Starter handle
Unlock chain brake
Throttle trigger
Choke
Throttle trigger
lockout
Ignition switch
Chain brake
Starter handle
Unlock chain brake