Echo CS-370 Chainsaw User Manual


 
27
CS-370
CS-370
Dimension L × W × H mm 393 × 245 × 277
Mass Power head, dry kg 4.5
Without chain and guide bar
Engine Type Air-cooled two-stroke single cylinder
Displacement mL (cm³) 36.3
Carburetor Diaphragm type
Magneto Flywheel magneto: CDI system
Spark plug NGK BPMR8Y
Starter Recoil starter
Power transmission Automatic centrifugal clutch
Fuel Mixture ratio 50 : 1 ratio with ECHO Power Blend™ two-stroke,
air-cooled engine oil.
89 octane unleaded. Do not use fuel containing
methyl alcohol, more than 10 % ethyl alcohol or 15 %
MTBE.
Tank capacity L 0.41
Oil Bar and chain ECHO bar and chain oil (or motor oil)
Tank capacity L 0.28
Guide bar and
See page 24 for Chain and Guide Bar Combination
saw chain
Lubrication Adjustable automatic oil pump
Standard Front hand guard, Rear hand guard,
features Anti-vibration device, Spiked bumper,
Throttle control lockout, Chain brake,
Chain catcher, Spark arrestor muffler, Kick guard
STORAGE AFTER USE
* Technical data subject to change without notice.
TECHNICAL DATA
Inspect and adjust every part of the chain saw.
- Completely clean every part and repair if
necessary.
- Apply thin coating of oil on metal parts to
prevent rust.
Remove chain and guide bar.
Drain fuel tank, pull starter slowly a few times to
drain fuel from carburetor.
Pour a small amount of clean motor oil into spark
plug hole, pull starter and crank the engine until
the TOP DEAD CENTER.
Store in a dry area, free from dust.
WARNING
DO NOT STORE IN ENCLOSURE WHERE
FUEL FUMES MAY ACCUMULATE OR
REACH AN OPEN FLAME OR SPARK.
CAUTION
Do not lend or rent your chain saw without
the Operator’s manual and Safety manual.
NOTE
• For future reference, you should keep this
Operator’s manual and the Safety manual.
• If this Operator’s manual or the Safety manual
has become illegible through impairment or is
lost, please purchase a new one from your
ECHO dealer.