Filter
Top Products
23
CS-352
MAINTENANCE AND CARE
IMPORTANT
Time intervals shown are maximum.
Actual use and your experience will determine
the frequency of required maintenance.
Your ECHO chain saw is designed to provide many
hours of trouble free service. Regular scheduled
maintenance will help your chain saw achieve that
goal. If you are unsure or are not equipped with the
necessary tools, you may want to take your unit to
an ECHO Service Dealer for maintenance. To help
you decide whether you want to DO-IT-YOURSELF
or have the ECHO Dealer do it, each maintenance
task has been graded. If the task is not listed ask
your ECHO dealer for repairs.
SKILL LEVELS
Level 1 = Easy to do. Most required tools come
with unit.
Level 2 = Moderate difficulty. Some specialized
tools may be required.
ECHO offers REPOWER™ Maintenance Kits and
Parts to make your maintenance job easier. Just
below each task heading are listed the various part
numbers required for that task. Ask your ECHO
dealer for these parts.
MAINTENANCE INTERVALS
Meintenance Procedure Letter Codes:
I = Inspect
C = Clean
R = Replace
Meintenance Procedure Notes:
(1)= Low evaporative fuel tanks DO NOT require
regular maintenance to maintain emission
integrity.
*=All recommendations to replace are based
on the finding of damage or wear during
inspection.
Component/system Maintenance procedure
Air Filter Inspect/Clean/Replace 1I/C* R*
Automatic Oiler Inspect/Adjust 1I
Oil Filter Inspect/Clean/Replace 1 I I/C*
Fuel System Inspect/Replace 1 I (1)* I (1)*
Fuel Filter Inspect/Replace 1 I* I/R*
Fuel Cap Gasket Inspect/Replace 1I*R*
Guide Bar and Sprocket Nose Inspect/Clean/Lubricate 1I/C* I
Saw Chain
Inspect/Sharpen/Replace/
Tensioning
2I*
Sprocket Inspect/Replace 2I*
Spark Plug Inspect/Clean/Replace 1 I/C/R*
Cooling System Inspect/Clean 2 I/C
Muffler Spark Arrestor Inspect/Clean/Replace 2 I/C/R*
Cylinder Exhaust Port Inspect/Clean/Decarbon 2 I/C
Recoil Starter Rope Inspect/Clean 1I/C*
Screws/Nuts/Bolts Inspect/Tighten/Replace 1I*
Every refuel
Required
Skill level
Daily or
Before use
3 Months or
90 Hours
Yearly or
600 Hours