Filter
Top Products
16
A
B
C
D
E
G
I
MAINTENANCE AND CARE
AIR FILTER
• Check before every use.
• Pull choke (A) all the way out (close position).
• Loosen bolt and remove air cleaner cover (B) and filter (C).
• Lightly brush dust off filter, and inspect for damage.
AUTOMATIC OILER
• The discharge volume of the automatic oiler is adjusted to 3
to 4 cc/mm (@ 7000 rpm) prior to shipment from the factory.
• Always check oil discharge when in use.
• Turn adjusting screw (D) counter-clockwise to increase oil
volume, clockwise to decrease oil volume.
F
OIL STRAINER
• Check periodically.
- Do not allow dust to enter into oil tank.
- Clogged oil strainer will affect the normal lubricating
system.
- Pick it up through oil port.
- If the strainer (F) is dirty, remove cover (E), pull strainer
out of oil tank, and wash it in suitable cleaning fluid.
- When the inside of the tank gets dirty, rinsing the tank
out with gasoline will clean it.
H
FUEL STRAINER
• Check periodically.
- Do not allow dust to enter fuel tank.
- Clogged strainer will cause difficulty in starting engine or
abnormalities in engine performance.
- Pick up the fuel strainer (G) through fuel inlet port with a
piece of steel wire, or the like.
- When the strainer is dirty, replace, or wash it in suitable
cleaning fluid.
- When the inside of the fuel tank is dirty, rinsing the tank
out with suitable cleaning fluid will clean it.
GUIDE BAR AND OIL HOLES
• Clean after each use
- Clean the grooves (H) of the guide bar with, for example,
a small screwdriver.
- Clean oil holes (I) with a wire.
• Reverse guide bar periodically.