Echo 99946400023 Pole Saw User Manual


  Open as PDF
of 4
 
4' Ex t E n s i o n At t A c h m E n t
op E r A t o r 's mA n u A l
3
8. Alignextensiondriveshaftadapter(H)withcuttingattachment
shaft (I).
NOTE
Locator screw in cutting attachment must align with locator hole
(L) in extension housing (J).
9. Align ridges on aluminum extension housing (J) with seams in
cutting attachment and slide cutting attachment onto extension
housing. Remove locator screw (B) to align locating hole in cutting
attachment with locating hole (L) in aluminum extension housing.
10. Install and tighten locator screw (B). Tighten two (2) cutting at-
tachment screws (A).
H
I
J
WARNING
• ThePowerPruner
TM
is designed to accept only one extension. Use of more than one extension or longer shafts can
resultinbalanceandcontrolproblemsleadingtopossiblepersonalinjurytooperatorandbystandersand/orunit
damage.
• UsethisextensionwithECHOPowerPruner
TM
models ONLY.
B
a
J
l
J
4' Extension Safety Label P/N 89007522761
 previous