Echo 99946400023 Pole Saw User Manual


  Open as PDF
of 4
 
2
4 f o o t e X t e n s i o n i n s t a l l a t i o n
Tools Required: Screwdriver, 3 mm Hex Wrench, Measuring Tape
Parts Required: 1220mm (4 Foot) Extension
WARNING
The Saw Chain is sharp! Always wear gloves when handling the
cutting attachment, otherwise serious personal injury may result.
1. Loosen the two (2) screws (A), and locator screw (B) on cutting
attachment, and remove the cutting attachment.
(PPT Only)
2. Loosen clamp knob (C) turning counter clockwise.
3. Pullaluminumhousing(D)outofberglasshousing610mm(24
in.),thenslide(D)backintoberglasshousingapproximately
305mm (12 in.) exposing inner drive shaft (E).
4. Loosen the extension clamp knob (G) turning counter clockwise.
(All Models)
5. Align inner drive shaft adapter (E) with extension shaft (F).
NOTE
Assure locator hole in extension shaft is oriented on same side as
locator hole in aluminum housing (D).
6a. Alignridgesonaluminumhousing(D)withgroovesinextension
housing.
6b. ModelsPPT-2100/2400/230/231/260/261
ModelsPP-1200/1250/1260:
Slide extension coupling onto aluminum housing (D) until
extension stops.
6c. ModelsPPT-265/265S/280:
Slide extension coupling onto aluminum housing (D) until
coupling stops against rivet in housing.
7. Tighten extension clamp knob (G) securely.
E
F
D
D
B
a
G
G
C
C
D
D
D
12 in.
E
G
 previous next