Filter
Top Products
TRIMMER ATTACHMENT
OPERATOR'S MANUAL
7
1
2
3
4
DESCRIPTION
Locate this safety decal on your unit. The complete unit illustration, found in the "DESCRIPTION" section, will help you
locate it. Make sure the decal is legible and that you understand and follow the instructions on it. If the decal cannot be
read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information.
P/N 89016054130
Shaft Decal
1. DRIVE SHAFT ASSEMBLY - Contains a specially designed liner and the flexible drive shaft.
2. NYLON CUTTING ATTACHMENT - Contains replaceable nylon trimming line that advances when the trimmer head
is tapped against the ground while the head is turning at normal operating speed.
3. CUT-OFF KNIFE - Automatically trims line to the correct length: 5 in. after head is tapped on the ground. If trimmer is
operated without a cut-off knife the line will become too long, the engine will overheat and engine damage may occur.
4. PLASTIC DEBRIS SHIELD ASSEMBLY - Shield assembly includes the Cut-Off Knife and Safety Decal. Helps
protect the operator by deflecting debris produced during the trimming operation. This shield must be replaced with
the steel shield for blade use.