Filter
Top Products
Po w e r ed g e r At t A c h m e n t
oP e r A t o r 's mA n u A l
7
co n t e n t s
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
___ 1 - Power Edger Attachment
___ 1 - Operators Manual
___ 1 - Warranty Registration Card
___ 2 - Split Pins
___ 1 - Locking Tool
___ 1 - Storage Hook Assembly
1. BLADE - Rotates to provide cutting action.
2. DEBRIS SHIELD/FLAP - Mounted over the cutting attachment. Helps protect operator by deecting debris
produced during the edging operation.
3. DRIVE SHAFT ASSEMBLY - Contains a specially designed liner and the exible drive shaft.
4. WHEEL - Adjustable up/down, sets depth of blade.
as s e m b l y
p o w e r
h e a d s h a f t /l o w e r s h a f t a s s e m b l y
A
B
D
Tools Required: None
Parts Required: PAS or SRM-SB Power Head w/Shaft & Coupling.
1. Set Power Head/Shaft Assembly on a level surface.
2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to
lock-out position.
3. Remove vinyl cap from attachment drive shaft.
4. Carefully t attachment drive shaft assembly into coupler (B) to de-
cal assembly line (C), making sure that the inner lower drive shaft
engages into the square upper drive shaft socket.