Filter
Top Products
Operator's Manual
5-Ton Electric Log Splitter W1200
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5
7
ASSEMBLY
1. Attach the control lever assembly by screwing the knob to the end of the lever. (SEE FIGURE 3)
2. Bolt the rolling wheel bracket to the log splitter beam and log cradles using the four M6-1 x 12 bolts and corresponding lock
(SEE FIGURE 3)
3. Attach safety guard lever to the top of the rolling wheel bracket with M6-1 x 12 bolts provided. (SEE FIGURE 3)
4. Assemble the handle bars by attaching the completed handle bar assembly to the log splitter beam using the M6 x 12 bolts,
the M6 x 1.5 washer, and the M6 x 13 x 1.75 washers provided. (SEE FIGURE 4)
Figure 3
log cradle
log cradle
rolling wheel bracket
control lever assembly
safety guard lever
rolling wheel bracket
M6 bolts
M6 x 13 washer
M6 x 1.5
washer
log splitter beam
Figure 4
4
3
5
completed
handle bar
assembly
M6 x 13 washer
M6 x 1.5
washer
M6 bolts