Filter
Top Products
18
Guarantee
DOLMAR guarantees the highest quality and will therefore reimburse all costs for mending through replacement of damaged parts
as a result of material or production faults, which occur within the guarantee time after purchase.
Please, note that in some countries particular guarantee conditions may exist. In case of any doubts, please, contact your salesman
who is responsible for the guarantee of the product.
We ask for your understanding that we cannot accept any responsibility for damage caused by:
• Disregard of the instruction manual.
• Non-performance of the required maintenance and cleaning instructions.
• Normal wear and tear.
• Obvious overload due to permanent excess of the upper limits of capacity.
• Use of guide bars and saw chains which have not been approved.
• Use of guide bar and saw chain lengths which have not been approved.
• Use of force, improper use, misuse or accidents.
• Damage caused by overheating due to dirt obstructing the cool air supply at the motor case.
• Use of unsuitable spare parts or parts which are not original DOLMAR parts, as far as they have caused the damage.
• Use of unsuitable or old oil.
• Damage related to conditions arising from lease or rent contracts.
• Works on the chain saw by unskilled persons or performance of inappropriate repairs.
Cleaning, servicing and adjustment works are not covered by the guarantee. All repairs covered by the guarantee are to be performed
by a DOLMAR service center.
Extract from the spare parts list
CAUTION: These accessories or attachments are recommended for use with your DOLMAR tool
specified in this manual. The use of any other accessories or attachments might present a risk of injury
to persons. The accessories or attachments should be used only in the proper and intended manner.
Included in the delivery inventory
Accessories
(not included in the delivery inventory)
2
3
4
5
1
Pos. DOLMAR No. Qty. Denomination
1 953 100 090 1 Chain gauge 3/8”
2 953 004 010 1 File handle
3 953 003 090 1 Round file ø 4 mm
4 953 003 060 1 Flat file
5 953 030 010 1 File holder compl. 3/8”
Pos. DOLMAR No. Qty.Denomination
1 205 114 203 1 Oil tank cap compl. 1 1 1
2 901 505 354 1 Screw for chain tightener 1 1 1
3 001 213 042 1 Nut with pin 1 1 1
4 923 208 004 1 Fastening nut 1 1 1
5 225 213 102 1
Sprocket guard
111
6 957 802 410 2 Carbon brushes 1 1 1
7 412 030 661 1 Sprocket nose bar 12" (30 cm) 1
7 412 035 661 1 Sprocket nose bar 14" (35 cm) 1
7 412 040 661 1 Sprocket nose bar 16” (40 cm) 1
8 528 091 046 1 Saw chain 3/8" for 12" 1
8 528 091 052 1 Saw chain 3/8" for 14" 1
8 528 091 056 1 Saw chain 3/8" for 16" 1
9 952 100 133 1 Chain protection cover (12”-16” ) 1 1 1
10 941 713 001 1 Universal wrench 1 1 1
1
2
9
4
10
5
8
3
6
7
151 161 171