Filter
Top Products
30
CARE AND MAINTENANCE
LUBRICATION:
1. Engine: Follow engine manufacturer’s
recommendation.
2. Deck spindles: Lubricate with 3 “shots” only,
every 100 hours.
HYDROSTATIC TRANSMISSIONS:
Before each use, check to be sure that the cooling fins
and fans of the pumps and wheelmotors are clean.
Excessive accumulation of oil, dirt, or trash may cause
the transmissions to overheat. NEVER WASH ACROSS
TOP OF RESERVOIR WITH WATER OR STEAM. Fill
reservoir as required per the maintenance schedule
listed in this book.