Filter
Top Products
TROUBLESHOOTING
MOWER CUT QUALITY:
There are many variables that can effect the cut quality of any riding mower. Type and
conditions of grass, cut height setting, engine RPM and ground speed are some of the variables
that interact creating differences in cut quality. Examination of one or more of the above will
generally produce a quality cut.
The Troubleshooting Chart suggests practices and adjustments that may be helpful in
improving cut quality. Your Dixon ZTR dealer is also available to provide assistance to you.
SITUATION CAUSES REMEDY
Poor cut quality
Poor cut quality
Ground speed
Incorrect engine to
mower deck belt
Reduce mowing speed Refer to
page 39 for part numbers
Poor cut quality Engine RPM too low Increase engine RPM to maximum
Poor cut quality Dull or bent blade Sharpen or replace as required
Poor cut quality Un-level mower deck Consult your dealer
Poor cut quality
Grass buildup under
mower deck
Clean out underside of mower deck
Poor cut quality Improper blades
Replace with original equipment
blade designed for the Estate Series
Models
Poor cut quality Uneven tire pressures
Check and adjust as required per
operators manual
Page 42