Filter
Top Products
OPERATION INSTRUCTIONS
DECKROLLERS:
Purpose:
The spring loaded deck rollers located at the front corners of the mower deck are
designed as an aid to limit turf scalping when mowing on uneven ground.
Height:
Normal height settings as installed at the factory allows each roller to ride slightly
above the turf. This setting should prove ideal under most mowing conditions.
Adjustment:
Some mowing applications may require lowering of each front roller. To lower the
roller, remove the pin, spring, washer and spacer P/N 9789 from the top of roller
bracket tube. Remove roller from tube. Slide spacer P/N 9789 on roller shaft and
reassemble using washer, spring and pin at the top.
Lubrication:
The use of a penetrating oil or light grease on the roller shafts will keep roller moving
freely.
Page 23